Servicing & Repairs

Service tailored to your bike

We have a modern fully equipped workshop and time served industry qualified technicians that work hard to achieve some of the best turnaround times in the South West. We are authorized and trained to work on Shimano, Bosch and Tranz x electric bikes. The quality of our workmanship is extremely important to us as is an honest and open working relationship with our customers. We don’t take short cuts or charge for things that don’t need doing, it’s for that reason we offer a bespoke open pricing policy with a 6 month no quibble guarantee on the work we have done.

  • Inspection of all working parts for wear and safe operation
  • Gears adjusted and tuned
  • Brakes adjusted and tuned
  • Chain cleaned and lubricated with wet or dry oil.
  • Minor true of wheels in the bike
  • Check and tighten bottom bracket
  • Check and tighten headset
  • Fit new brake blocks or pads
  • Install new gear or brake cables £5.00 each
  • Install new hub gear cable £7.50
  • Install new wheels (includes removing old wheels and changing the cassette) £5.00 each
  • Fit new tyre and tubes £5.00 each
  • Wheel hub adjustment (includes basic tightening of cones) £5.00 each
  • Hub service (includes disassembling, cleaning, new grease and bearings) £12.50 each
  • Wheel true using wheel jig £5.00
  • Install new spokes and true wheel (up to 3 spokes) £12.50
  • Install new bottom bracket (includes facing if required) £17.50
  • Install new headset £17.50
  • Install new front or rear derailleur £5.00
  • Install new chain (only if old one is less than 50% worn) £5.00
  • Install new chain and cassette £10.00
  • Fit gear levers (STI or rapid fire) £5.00 each
  • Fit new derailleur hanger £5.00
  • Straighten bent derailleur hanger £3.50
  • Fit new handlebar tape £5.00
  • Full suspension MTB frame bearing replacement £60.00
  • Install a MTB dropper seat post (cable/Hydraulic) £12.00/£20.00
  • Hydraulic brake bleed £12.50 each
  • Install Hydraulic brake £15.00 each
  • Tubeless conversion (includes tape and stans sealant) £15.00 each
  • Basic fork service (clean,oil and foam seals only, parts excluded) £40.00
  • Remove and refit forks for manufacture service, inc headset clean and re-grease £20.00
  • Fit full mudguards £10.00
  • InvisiFRAME (Bespoke bike frame protection) £35.00
  • Accessories purchased from Cycle Service (excluding full mudguards) £FOC
  • Di2 software update/diagnostics £10.00
  • Fit new tyre/tube to a loose wheel £8.00
  • Fit new tyre or tube on a standard pedal bike (includes Bosch/Steps ebike) £10.00
  • Fit new tyre or tube to a bike with hub gear/brake rear wheel £15.00
  • Fit new tyre or tube to an ebike rear wheel with a hub motor £20.00
  • Install one gear or brake cable £10.00 each
  • Wheel hub adjustment (basic tightening of cones) £7.50 each
  • Install new spokes and true wheel (up to 3 spokes) £17.50
  • True front or rear wheel true using the wheel jig £10.00
  • Hub service (includes disassembly, cleaning, new grease and bearings) £20.00 each
  • Tubeless conversion (includes tape and stans sealant) £20.00 each
  • Install new wheels (includes removing old wheels, changing cassette,tyre,tubes) £10.00 each
  • Install new brake blocks or pads £7.50 per pair
  • Hydraulic brake bleed £20.00 each
  • Install hydraulic brake £17.50 each
  • Install front or rear derailleur £12.50
  • Install new chain (only if the old chain is less than 50% worn) £10.00
  • Install new chain and cassette £15.00
  • Fit new derailleur hanger £7.50
  • Straighten bent derailleur hanger £5.00
  • Install new cassette to a loose wheel £5.00
  • Chain cleaning £7.50
  • Install new bottom bracket (includes facing if required) £25.00
  • Fit gear levers (STI or rapid fire) £15.00 each
  • Install new hub gear cable £15.00
  • Install new headset £22.50
  • Adjust headset (includes cleaning and lubricating) £12.50
  • Fit new handlebar tape £10.00
  • Full suspension MTB frame bearing replacement £85.00
  • Install a MTB dropper seat post (cable/hydraulic) £20.00/£25.00
  • Basic fork service (clean,oil and foam seals only, parts excluded) £40.00
  • Remove and refit forks for manufacturer service (inc headset clean and re-grease) £20.00
  • Fit full mudguards £20.00
  • Insurance damage letter £25.00
  • InvisiFRAME (bespoke bike frame protection, includes kit) £129.00
  • Ebike Bosch or Shimano software update £12.50
  • Di2 software updates and diagnostics £12.50
  • Accessories purchased from Cycle Service (excluding full mudguards) FOC
  • Hand built wheel build from £40.00

All new bikes purchased from Cycle Service Ltd come with free lifetime servicing for the lifetime of the original owner. Customers must bring the bike back to us every year within a month of it’s anniversary. Our free service package entitles customers to a free “Regular Service”  worth £29.50 only paying for any parts used. Any additional work required outside of our regular service package will be charged at the subsidised regular service “add on” labour rates.

Failure to bring the bike back annually or if the first 6 week service is missed will void this offer.

All our work is carried out by Cytech qualified technicians. If the work carried out is in line with our recommendations, we will guarantee it for 6 months. Our customers receive a guarantee certificate on collection.

Accessories purchased from Cycle Service that qualify for free of charge fitting are:

Locks, pannier racks, luggage, child seats, saddles, handlebar grips, bottle cages, lights, handlebar stems (if no cable alteration is needed), computers, pedals, pumps, hydraulic brakes, wheelsets (front and rear wheels), tyre sets (front and rear tyres).

Our ultimate aim is to keep you riding

Sales - Service - Repairs

Home | About | Bikes | Servicing | Contact | Sitemap

©2017 Cycle Service

or

Log in with your credentials

or    

Forgot your details?